SL TS 133 GN Set DW-4 EU Gooseneck Microphone Set from Sennheiser includes an SL Table Stand 133-S DW, a MEG 14-40 B gooseneck microphone, an SL Rack Receiver DW with power supply, a BA 40 rechargeable battery, and a rackmount kit. Optimized for speech transmission, this flexible wireless set offers speech intelligibility and ease of use for meeting participants, in conference rooms, offices, and huddle rooms.
The table stand features a 3-pin XLR port for connecting to the gooseneck microphone; it connects wirelessly to the receiver and can be charged wirelessly or via included USB cable. The rechargeable battery allows up to 11 hours of operation and an LED provides battery life status. The receiver features a clear visible OLED display for easy setup and operation. The automatic frequency and interference management allows convenient and reliable operation. The microphone set can be controlled and monitored remotely via the Sennheiser Control Cockpit software (available separately).
SL TS 133 GN Set DW-4 EU Gooseneck Microphone
System
| AF Frequency Response |
20 Hz to 20 kHz
|
| Dynamic Range |
> 120 dB
|
| THD |
0.1% at 1 kHz
|
| Audio Sampling |
24-bit / 48 kHz
|
| Signal to Noise Rate |
> 90 dB
|
| Encryption |
AES 256
|
| RF Frequency Range |
US: 1920 to 1930 MHz
|
| Modulation |
GFSK with back channel
|
| Transmission Method |
TDMA, space diversity
|
| Latency |
19 ms
|
| Relative Humidity |
95% maximum
|
| Operating Temperature |
14 to 131°F / -10 to 55 °C
|
| Storage Temperature |
-4 to 158°F / -20 to 70°C
|
Receiver
| RF Sensitivity |
< -90 dBm
|
| RF Output Channels |
Adaptive, up to 250 mW (country-specific)
|
| Audio Output Level |
XLR Balanced: Maximum +18 dBu
RCA Unbalanced: Maximum +6 dBu
|
| Audio Effects |
Low Cut: -3 dB at 120 Hz
Equalizer: 7-band graphic equalizer with sound presets
Sound Profiles: Female voice, male voice, and media
|
| Display |
OLED
|
| Network Protocol |
Media Control Protocol, TCP/IP IPv4 (DHCP, manual)/IPv6
|
| Power Supply |
12 VDC
|
| Current Consumption |
350 mA
|
| Connectors |
1 x XLR
2 x RCA
2 x reverse SMA
1 x RJ45
1 x power
|
| Dimensions |
8.4 x 1.7 x 6.6″ / 21.2 x 4.3 x 16.8 cm
|
| Weight |
29 oz / 828 g
|
Power Supply
| Nominal Input Voltage |
100 to 240 VAC
|
| Power Frequency |
50 or 60 Hz
|
| Input Current |
Maximum 120 mA
|
| Power Consumption |
Standby: ≤ 0.3 W
|
| Operating Temperature |
14 to 131°F / -10 to 55°C
|
| Storage Temperature |
-4 to 158°F / -20 to 70°C
|
| Relative Humidity |
95%
|
| Dimensions |
Not specified by manufacturer
|
| Weight |
Approx. 3.5 oz / 100 g
|
Stand
| AF Frequency Response |
75 Hz to 20 kHz
|
| Max Input |
1.7 V RMS
|
| Input Impedance |
30 kOhms
|
| Power Supply |
BA 40 accupack
|
| Operating Time |
Up to 11 hours
|
| Microphone Connector |
3-pin XLR
|
| Operating Temperature |
50 to 113°F / 10 to 45°C
|
| Relative Humidity |
95%
|
| Dimensions |
6.6 x 4.7 x 1.9″ / 16.7 x 12.0 x 4.8 cm
|
| Weight |
23 oz / 660 g without battery
|
Battery
| Model |
BA 40
|
| Capacity |
2200 mAh
|
| Output Voltage |
3.6 V
|
Microphone
| Pick Up Pattern |
Cardioid
|
| Frequency Response |
50 Hz to 20 kHz
|
| Acoustic Principle |
Gooseneck microphone (condenser)
|
| Output Impedance |
< 100 Ohms at 1 kHz
|
| Sensitivity |
15 mV/Pa
|
| Maximum Sound Pressure Level (SPL) |
130 dB at 1 kHz < 3%
|
| Equivalent Noise Level |
37 dB (CCIR)
26 dB (A)
|
| Power Supply |
Microphone: 12 to 48 V phantom power
|
| Current Consumption |
3 mA
|
| Connector |
3-pin XLR
|
| Operating Temperature |
32 to 104°F / 0 to 40°C
|
| Storage Temperature |
-13 to 158°F / -25 to 70°C
|
| Length |
17.7″ / 45.0 cm
|
Packaging Info
| Package Weight |
7.65 lb
|
| Box Dimensions (LxWxH) |
16 x 13.7 x 3″
|
Foldable LED Screen Display is new trend now
Sennheiser Support
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.