DCi 8|600DA Eight-channel Amplifier

Output Power: Dual Mode – All Channels Driven

DCi DA Model	Channels	2Ω	4Ω	8Ω	16Ω	70Vrms	100Vrms
4\|300DA	4	150W	300W	300W	150W	300W	300W
8\|300DA	8	150W	300W	300W	150W	300W	300W
4\|600DA	4	300W	600W	600W	300W	600W	600W
8\|600DA	8	300W	600W	600W	300W	600W	600W
4\|1250DA	4	1250W	1250W	1250W	625W	1250W	1250W

Minimum Guaranteed Power (20Hz – 20kHz)

Output Power: Bridge Mono Mode – All Channels Driven

DCi DA Model	4Ω	8Ω	16Ω	140Vrms	200Vrms
4\|300DA	300W	600W	600W	600W	600W
8\|300DA	300W	600W	600W	600W	600W
4\|600DA	600W	1200W	1200W	1200W	1200W
8\|600DA	600W	1200W	1200W	1200W	1200W
4\|1250DA	2500W	2500W	2500W	2500W	2500W

Minimum Guaranteed Power (20Hz – 20kHz)

More Details

– Redundant, independent Dante / AES67 ports
• Primary & Secondary
• Will accept 48khz or 96khz
• Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
– Audio Architect Control and Monitoring
– DriveCore Amplifier Technology
– Universal PFC Power Supply
– DSP
• 48kHz processing
• 20 Presets
• Input router
– High, medium, and low priority inputs
• Input delay up to 2s
• Input EQ
• Crossover
• Output EQ
• Output Delay up to 100ms
• LevelMAX limiter
• Load Monitoring
– Pilot tone
• Normal
• Burst
– Continuous Load Monitoring
– Sweep Load Monitoring
• Channel Auto-Standby
• Speaker Tunings
– Aux-Port
• Sleep contact closure
• Amp Status output
– Removable air filters
– Front panel LED indicators
– AES67 Compatible
– EN 54-16 Compliant for life safety applications

Features

INTEGRATED DANTE™ / AES67 NETWORKED AUDIO – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.

NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.

DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring

EN 54-16 Compliant for Life Safety Applications – Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Specifications

Output Channels	8
Frequency Response (8Ω, 20Hz – 20kHz)	±0.25dB
Total Harmonic Distortion (at full rated power, 20Hz – 20kHz)	0.35%
Damping Factor (20Hz to 100Hz)	>1000
Load Impedance (Stereo/Dual Mode)	2Ω – 16Ω; 70Vrms and 100Vrms
Load Impedance Bridge Mono	4Ω – 16Ω; 140Vrms and 200Vrms
Cooling	Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M)	47
Required AC Mains (±10%)	100V-240V ~ 50/60Hz
Power Connector	20A IEC
Dimensions (W x H x D)	483 mm x 89 mm x 432 mm 19 in x 3.5 in x 17 in
Weight	13.60 kg (30 lbs)